trensim.comSimulación Ferroviaria
   

1600 + 15 plateados.con

Cuestiones referidas a composiciones (consists)

Moderador: Moderadores

1600 + 15 plateados.con

Notapor alvaromad » Sab Ene 19, 2008 1:17 pm

Buenas!.

Resulta que en la actividad "embarque militar a morón", me dan los errores con el train store, que ya se dijeron en su día que no pasaba nada así como un consist que se soluciona rápido.

Ahora bien, me ha salido otro consist que lleva por título el hilo y por más que he hecho cosas, no para de darme errores.

Al principo el problema era porque los vagones Hbbins que son los "15 plateados" tenía enganche tipo Chain y la loco Automatic, y cambié lo de los vagones a Automatic, como ya se dijo en otro hilo para evitar problemas.

Resulta que he probado en hacer cosas como en el otro hilo que abrí sobre los 00Teco y aún así tampoco me deja de dar errores.

He probado rectificando el consist cambiando 1600 por 1601 que es la loco en cuestió y nada, he intentado sustituir la loco y tampoco, he reinstalado la 1601 y el pack de vagones y tampoco.

Me he fijado que aunque cambie el consist, al cargar la actividad crea el original consist 1600 + 15 plateados.con"

Así que he vuelto a cambiar el consist dejándolo como estaba de inicio; aquí os dejo una screen de lo que pone:

Imagen

Saludos y haber que pensais que puede ser :?
alvaromad
 
Mensajes: 59
Registrado: Mié Dic 05, 2007 1:17 pm

Notapor busferro » Sab Ene 19, 2008 2:00 pm

Una pregunta ¿ el consist que tienes es "1600+15 plateados" o "1600 + 15 plateados" ?, porque el que pide es el que tiene el nombre sin blancos entre los números y el signo +. :-k
Un saludo

Arturo Ares

MSTS: Vale más malo conocido que bueno por conocer.
Avatar de Usuario
busferro
 
Mensajes: 1967
Registrado: Sab Jun 11, 2005 10:11 am
Ubicación: Cambre-La Coruña

Notapor alvaromad » Sab Ene 19, 2008 4:55 pm

busferro escribió:Una pregunta ¿ el consist que tienes es "1600+15 plateados" o "1600 + 15 plateados" ?, porque el que pide es el que tiene el nombre sin blancos entre los números y el signo +. :-k


Buenas!.

Gracias por contestar^^. Púes tengo el consist con todo junto, "1600+15plateados.con" y así me dan menos errores que los de la screen que puse, porque si pongo 1600+15 plateados me dan más
:?

¿Podrías copiar y pegar aquí el contenido del consist por si es porque me faltase un paréntesis o algo?.

Saludos
alvaromad
 
Mensajes: 59
Registrado: Mié Dic 05, 2007 1:17 pm

Notapor Julio » Sab Ene 19, 2008 6:13 pm

¡Hóla!:
Efectivamente, puede ser que hayas tocado sin querer algún paréntesis... Te pongo el contenido del Consist, tal como lo tengo yo.
SIMISA@@@@@@@@@@JINX0D0t______

Train (
TrainCfg ( "1600+15 plateados"
Serial ( 1 )
MaxVelocity ( 33.33130 0.27061 )
NextWagonUID ( 16 )
Durability ( 1.00000 )
Engine (
UiD ( 0 )
EngineData ( RENFE-1601 RENFE-1601 )
)
Wagon (
WagonData ( Hbbins03 Renfe_hbbins )
UiD ( 1 )
)
Wagon (
WagonData ( Hbbins03 Renfe_hbbins )
UiD ( 15 )
)
Wagon (
WagonData ( Hbbins03 Renfe_hbbins )
UiD ( 14 )
)
Wagon (
WagonData ( Hbbins03 Renfe_hbbins )
UiD ( 13 )
)
Wagon (
WagonData ( Hbbins03 Renfe_hbbins )
UiD ( 12 )
)
Wagon (
WagonData ( Hbbins03 Renfe_hbbins )
UiD ( 11 )
)
Wagon (
WagonData ( Hbbins03 Renfe_hbbins )
UiD ( 10 )
)
Wagon (
WagonData ( Hbbins03 Renfe_hbbins )
UiD ( 9 )
)
Wagon (
WagonData ( Hbbins03 Renfe_hbbins )
UiD ( 8 )
)
Wagon (
WagonData ( Hbbins03 Renfe_hbbins )
UiD ( 7 )
)
Wagon (
WagonData ( Hbbins03 Renfe_hbbins )
UiD ( 6 )
)
Wagon (
WagonData ( Hbbins03 Renfe_hbbins )
UiD ( 5 )
)
Wagon (
WagonData ( Hbbins03 Renfe_hbbins )
UiD ( 4 )
)
Wagon (
WagonData ( Hbbins03 Renfe_hbbins )
UiD ( 3 )
)
Wagon (
WagonData ( Hbbins03 Renfe_hbbins )
UiD ( 2 )
)
)
)
¡Saludos desde La Rioja!. Julio.
Avatar de Usuario
Julio
 
Mensajes: 1843
Registrado: Dom Feb 26, 2006 7:48 pm
Ubicación: La Rioja.

Notapor alvaromad » Dom Ene 20, 2008 8:38 pm

Buenas!.

Gracias Fuwito, pero sigue igual :? . Lo extraño es que si pongo 1600+15plateados me da sólo un pequeño error, pero si pongo 1600+15 plateados, me da una lista bastante larga y relacionada por los errores .srv que eran normales pero que no hacen más que fastidiar:

-Poniendo 1600+15 plateados, me sale esto:

--------------------------------------------------------------
Aviso: Elemento Nº 1
La definición de la locomotora del archivo del Consist es distinta de la especificada en los parámetros del archivo de dicha locomotora.
(Deben ser idénticas)
Detiene el Listado de Consist que aparece en selección de la Exploración MSTS
Consist "Archivo: '1600+15 plateados.con'
Locomotora "Archivo: 'RENFE-1601\RENFE-1601.ENG'

Error: Elemento Nº 2
El siguiente archivo contiene un 'Wagon' parámetro distinto del nombre del archivo
(Deben ser idénticas)
Causa errores cuando MSTS inicia una Actividad o inicia una Exploración
Carpeta: 'TRAINS\TRAINSET'
Archivo: 'RENFE-1601\RENFE-1601.ENG'
Descripción: 'RENFE 1601 UN Tracción'


Análisis de Errores


Informe Cuando se usan


RENFE-1601\RENFE-1601.ENG

Consists:
1600+15 plateados.con (TRAINS\CONSISTS\1600+15 plateados.con)
1601_aislada.con (TRAINS\CONSISTS\1601_aislada.con)

Servicios:
embarque entrada mercante en utrera (Routes\HISPALIS_1\SERVICES\embarque entrada mercante en utrera.srv) (Desde: 1600+15 plateados.con)
POS AIS Filella - Santa Ana (Routes\CGLV2\SERVICES\POS AIS Filella - Santa Ana.srv) (Desde: 1601_aislada.con)

Actividades:
El Postal Norte (Routes\CGLV2\ACTIVITIES\Postal Norte.act) (Desde: Routes\CGLV2\SERVICES\POS AIS Filella - Santa Ana.srv)
Embarque Militar en Morón (Routes\HISPALIS_1\ACTIVITIES\embarque militar en moron.act) (Desde: Routes\HISPALIS_1\SERVICES\embarque entrada mercante en utrera.srv)

1600+15 plateados.con

Servicios:
embarque entrada mercante en utrera (Routes\HISPALIS_1\SERVICES\embarque entrada mercante en utrera.srv)

Actividades:
Embarque Militar en Morón (Routes\HISPALIS_1\ACTIVITIES\embarque militar en moron.act) (Desde: Routes\HISPALIS_1\SERVICES\embarque entrada mercante en utrera.srv)

---------------------------------------------------------------------

-Si pongo 1600+15plateados sale esto:

---------------------------------------------------------------------

Listado de Informes/Errores/Avisos

Error: Elemento Nº 1
El siguiente archivo no se ha encontrado.
Carpeta: 'TRAINS\CONSISTS'
Archivo: '1600+15 plateados.con'
Descripción: ''


Análisis de Errores


Informe Cuando se usan


1600+15 plateados.con

Servicios:
embarque entrada mercante en utrera (Routes\HISPALIS_1\SERVICES\embarque entrada mercante en utrera.srv)

Actividades:
Embarque Militar en Morón (Routes\HISPALIS_1\ACTIVITIES\embarque militar en moron.act) (Desde: Routes\HISPALIS_1\SERVICES\embarque entrada mercante en utrera.srv)
-----------------------------------------------------------------------

Saludos
alvaromad
 
Mensajes: 59
Registrado: Mié Dic 05, 2007 1:17 pm

Notapor busferro » Dom Ene 20, 2008 9:00 pm

El consist correcto es el primero 1600+15 plateados. El error que te da es dentro del archivo .eng de la locomotora, tienes que buscar la palabra traccion y quitarsela. Haz primero una copia del archivo por si las moscas.
Un saludo

Arturo Ares

MSTS: Vale más malo conocido que bueno por conocer.
Avatar de Usuario
busferro
 
Mensajes: 1967
Registrado: Sab Jun 11, 2005 10:11 am
Ubicación: Cambre-La Coruña

Notapor alvaromad » Dom Ene 20, 2008 9:50 pm

busferro escribió:El consist correcto es el primero 1600+15 plateados. El error que te da es dentro del archivo .eng de la locomotora, tienes que buscar la palabra traccion y quitarsela. Haz primero una copia del archivo por si las moscas.


He puesto el consist como dices y he borrado lo que me dijiste y sigue igual :? . Ya nosé que hacer :cry:

Os adjunto como tengo el .eng de la 1601:

SIMISA@@@@@@@@@@JINX0D0t______

Wagon ( RENFE-1601-UN
Type ( Engine )
WagonShape ( RENFE-1601-UN.s )
Size ( 2.997m 4.650m 17.986m )
Mass ( 109.5t )
WheelRadius ( 0.508m )
InertiaTensor ( Box (3.1m 4.8m 19.1m) )
Coupling (
Type ( Automatic )
Spring (
Stiffness ( 1e6N/m 5e6N/m )
Damping ( 1e6N/m/s 1e6N/m/s )
Break ( 1.1e7N 1.1e7N )
r0 ( 5cm 10cm )
)
Velocity ( 0.1m/s )
)
Buffers (
Spring (
Stiffness ( 1e6N/m 5e6N/m )
Damping ( 1e6N/m/s 1e6N/m/s )
r0 ( 0m 1e9 )
)
Centre ( 0.5 )
Radius ( 1 )
Angle ( 0.5deg )
)

Adheasion ( 0.2 0.4 2 0 )
DerailRailHeight ( 4cm )
DerailRailForce ( 2.5*250e3lbs )
DerailBufferForce ( 200kN )
NumWheels ( 6 )
Friction (
1475N/m/s 1 -1mph 15.49n/m/s 1.8

5.1N/rad/s 1 -1rad/s 0 1
)
Comment ( AntiSlip () )
Comment ( Dudo que estas Alco en particular tuvieran algun sistema de antipatinaje.
De todas maneras, el activar el antipatinaje va en gusto de cada uno.
Yo lo prefiero desactivado aunque la locomotora en realidad lleve equipo de
antipatinaje electrónico, puesto que al estar activo los controles "arenado"
y "luz de patinaje" no tienen sentido, el MSTS los anula, y se encarga él de
aplicar el arenado cuando lo cree conveniente. Las maquinas que llevan,
por ejemplo, elementos de control de patinaje como el IDAP de General Motors,
llevan ambos controles y son totalmente funcionales. )

BrakeEquipmentType( "Triple_valve, Auxilary_reservoir, Emergency_brake_reservoir" )

BrakeSystemType( "Air_single_pipe" )
MaxBrakeForce ( 200kN )

EmergencyBrakeResMaxPressure( 110 )
TripleValveRatio( 2.5 )
MaxReleaseRate( 30 )
MaxApplicationRate( 25 )
MaxAuxilaryChargingRate( 5 )
EmergencyResCapacity( 10 )
EmergencyResChargingRate( 25 )
BrakeCylinderPressureForMaxBrakeBrakeForce( 70 )

IntakePoint ( -0.5 2.0 FuelDiesel )

Lights ( 15
Light (
comment( Sphere of light )
Type ( 1 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
Cycle ( 0 )
FadeIn ( 0.5 )
FadeOut ( 0.5 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffeadab6 )
Position ( 0.0 2.773 8.527 )
Transition ( 0 )
Radius ( 400.0 )
Angle ( 15.0 )
)
)
)
Light (
comment( Faro Frontal1 Dim )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 2 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffeadab6 )
comment (X Z Y)
Position ( 0.00 2.890 8.528 )
Transition ( 0 )
Radius ( 0.35 )
)
)
)
Light (
comment( Faro Frontal1 Bright )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffFBFFDF )
comment (X Z Y)
Position ( 0.00 2.890 8.528 )
Transition ( 0 )
Radius ( 0.65 )
)
)
)
Light (
comment( Faro Frontal2 Dim )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 2 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffeadab6 )
comment (X Z Y)
Position ( 0.00 2.610 8.527 )
Transition ( 0 )
Radius ( 0.35 )
)
)
)
Light (
comment( Faro Frontal2 Bright )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffFBFFDF )
comment (X Z Y)
Position ( 0.00 2.610 8.527 )
Transition ( 0 )
Radius ( 0.65 )
)
)
)
Light (
comment( Faro Frontal Inf Izq Dim )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 0 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80fdecbe )
comment (X Z Y)
Position ( 0.887 1.633 8.455 )
Transition ( 0 )
Radius ( 0.5 )
)
)
)
Light (
comment( Faro Frontal Inf Izq Bright )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 0 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80fdecbe )
comment (X Z Y)
Position ( 0.887 1.633 8.455 )
Transition ( 0 )
Radius ( 0.5 )
)
)
)

Light (
comment( Faro Frontal Inf Derecho Dim )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 0 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80fdecbe )
comment (X Z Y)
Position ( -0.98 1.633 8.455 )
Transition ( 0 )
Radius ( 0.5 )
)
)
)

Light (
comment( Faro Frontal Inf Derecho Bright )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 0 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80fdecbe )
comment (X Z Y)
Position ( -0.98 1.633 8.455 )
Transition ( 0 )
Radius ( 0.5 )
)
)
)

Light (
comment( Faro Superior Izq Trasero Dim )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 0 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffc30303 )
Position ( -0.95 3.738 -8.558 )
Azimuth ( -180 -170 -180 )
Transition ( 0 )
Radius ( 0.60 )
)
)
)

Light (
comment( Faro Superior Izq Trasero Bright )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 0 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffc30303 )
Position ( -0.95 3.738 -8.558 )
Azimuth ( -180 -170 -180 )
Transition ( 0 )
Radius ( 0.60 )
)
)
)
Light (
comment( Faro Central Trasero Dim )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 0 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffc30303 )
Position ( 0.00 2.194 -8.278 )
Azimuth ( -180 -180 -180 )
Transition ( 0 )
Radius ( 0.60 )
)
)
)

Light (
comment( Faro Central Trasero Bright )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 0 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffc30303 )
Position ( 0.00 2.194 -8.278 )
Azimuth ( -180 -180 -180 )
Transition ( 0 )
Radius ( 0.60 )
)
)
)

Light (
comment( Faro Superior Derecho Trasero Dim )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 0 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffc30303 )
Position ( 0.942 3.738 -8.578 )
Azimuth ( -180 169.5 -180 )
Transition ( 0 )
Radius ( 0.60 )
)
)
)

Light (
comment( Faro Superior Derecho Trasero Bright )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 0 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffc30303 )
Position ( 0.942 3.738 -8.578 )
Azimuth ( -180 169.5 -180 )
Transition ( 0 )
Radius ( 0.60 )
)
)
)
)

Sound ( "..\\..\\GP38\\sound\\gp38eng.sms" )
)

Engine ( RENFE-1601-UN
Effects
(
DieselSpecialEffects
(
comment
(
the format of these little blocks is as follow:

offset.x offset.y offset.z
normal.x normal.y normal.z
width in metres

defining the offset from the shape pivot point
where steam / smoke should appear, the direction
it should go and the width of the nozzle
)

Exhaust1
(
-0.044 3.554 -1.366
0 1 0
0.15
)
)
)

Wagon ( RENFE-1601-UN )
Type ( Diesel )
MaxPower ( 1780hp )
MaxForce ( 240kN )
MaxContinuousForce ( 178.08219178082191kN )
MaxVelocity ( 74.56mph )
MaxCurrent ( 1500A )
WheelRadius ( 0.508m )
comment( sanding system is switched off when faster than given velocity )
Sanding ( 1e9mph )

NumWheels ( 6 )
MaxTemperature ( 120 )
MaxOilPressure ( 90 )

CabView ( 318.cvf )
MaxDieselLevel ( 800.4413175gal )
DieselUsedPerHourAtMaxPower ( 60gal )
DieselUsedPerHourAtIdle ( 10gal )

AirBrakesAirCompressorPowerRating( 1.0 )
AirBrakesMainMinResAirPressure( 0 )
AirBrakesMainMaxAirPressure( 110 )
AirBrakesMainResVolume( 8 )
AirBrakesAirCompressorWattage( 11936 )
AirBrakesCompressorRestartPressure( 105 )
AirBrakesAirUsedPerPoundsOfBrakePipePressure( 1 )
AirBrakesIsCompressorElectricOrMechanical( 1 )

EngineBrakesControllerMinPressureReduction( 6 )
TrainBrakesControllerMinPressureReduction( 6 )
EngineBrakesControllerHasProportionalBrake( 1 )
EngineBrakesProportionalBrakeLag( 0.9 )
EngineBrakesControllerMaxApplicationRate( 2.5 )
TrainBrakesControllerMaxApplicationRate( 2.5 )
EngineBrakesControllerMaxReleaseRate( 15 )
TrainBrakesControllerMaxReleaseRate( 20 )
EngineBrakesControllerEmergencyApplicationRate( 50 )
TrainBrakesControllerEmergencyApplicationRate( 50 )
EngineBrakesControllerMinSystemPressure( 0 )
TrainBrakesControllerMinSystemPressure( 0 )
EngineBrakesControllerMaxSystemPressure( 70 )
TrainBrakesControllerMaxSystemPressure( 70 )
EngineBrakesControllerEmergencyBrakeTimePenalty( 60 )
TrainBrakesControllerEmergencyBrakeTimePenalty( 60 )
EngineBrakesControllerFullServicePressureDrop( 26 )
TrainBrakesControllerFullServicePressureDrop( 26 )


DynamicBrakesMinUsableSpeed( 5 )
DynamicBrakesMaximumEffectiveSpeed( 25 )
DynamicBrakesMaximumForce( 30kn )
DynamicBrakesResistorCurrentLimit ( 700 )
DynamicBrakesCutInSpeed( 8 )
DynamicBrakesMaxAirBrakePressure ( 15 )
DynamicBrakesFadingSpeed( 25 )
DynamicBrakesDelayTimeBeforeEngaging ( 10 )
DynamicBrakesMaximumSpeedForFadeOut ( 465 )
DynamicBrakesEffectAtMaximumFadeOut( 0 )
DynamicBrakesHigherSpeedCurveExponent( 1 )
DynamicBrakesLowerSpeedCurveExponent( 1 )
DynamicBrakesNumberOfControllerNotches( 10 )


BrakesEngineBrakeType( "Air_single_pipe" )
BrakesTrainBrakeType( "Air_single_pipe" )
BrakesEngineControllers( "Independent, Train, Dynamic" )

EngineBrakesControllerDirectControlExponent( 1 )

MaxDieselLevel ( 800.4413175gal )
DieselUsedPerHourAtMaxPower ( 60gal )
DieselUsedPerHourAtIdle ( 10gal )

DieselSmokeEffectInitialMagnitude( 0.8 )
DieselSmokeEffectMaxMagnitude( 9.0 )
DieselSmokeEffectInitialSmokeRate( 0.45 )
DieselSmokeEffectMaxSmokeRate( 6.5 )

DieselEngineIdleRPM( 255 )
DieselEngineMaxRPM( 1000 )
DieselEngineSpeedOfMaxTractiveEffort( 13.67kph )
DieselEngineMaxRPMChangeRate( 40 )

DoesHornTriggerBell( 0 )

EmergencyStopMonitor(
MonitoringDeviceMonitorTimeLimit( 0 )
MonitoringDeviceAlarmTimeLimit( 0 )
MonitoringDevicePenaltyTimeLimit( 0 )
MonitoringDeviceCriticalLevel( 0 )
MonitoringDeviceResetLevel( 0 )
MonitoringDeviceAppliesFullBrake( 0 )
MonitoringDeviceAppliesEmergencyBrake( 1 )
MonitoringDeviceAppliesCutsPower( 0 )
MonitoringDeviceAppliesShutsDownEngine( 0 )
)

AWSMonitor(
MonitoringDeviceMonitorTimeLimit( -1 )
MonitoringDeviceAlarmTimeLimit( 5 )
MonitoringDevicePenaltyTimeLimit( 0 )
MonitoringDeviceCriticalLevel( 0 )
MonitoringDeviceResetLevel( 0 )
MonitoringDeviceAppliesFullBrake( 0 )
MonitoringDeviceAppliesEmergencyBrake( 1 )
MonitoringDeviceAppliesCutsPower( 0 )
MonitoringDeviceAppliesShutsDownEngine( 0 )
)

EngineVariables( 3600 )

EngineControllers (
Throttle ( 0 1 0.125 0 0.
NumNotches ( 9
Notch ( 0 0 Dummy )
Notch ( 0.125 0 Dummy )
Notch ( 0.25 0 Dummy )
Notch ( 0.375 0 Dummy )
Notch ( 0.5 0 Dummy )
Notch ( 0.625 0 Dummy )
Notch ( 0.75 0 Dummy )
Notch ( 0.875 0 Dummy )
Notch ( 1 0 Dummy )
)
)
Brake_Engine ( 0 1 0.0125 0
NumNotches ( 1
Notch( 0 1 Dummy )
)
)
Brake_Train ( 0 1 0.25 0.75
NumNotches ( 5
Notch( 0.0 0 TrainBrakesControllerFullQuickReleaseStart )
Notch( 0.25 0 TrainBrakesControllerRunningStart )
Notch( 0.50 0 TrainBrakesControllerHoldStart )
Notch( 0.75 0 TrainBrakesControllerFullServiceStart )
Notch( 1.0 0 TrainBrakesControllerEmergencyStart )
)
)

Brake_Dynamic ( 0 1 0.11 0
NumNotches ( 10
Notch ( 0 0 Dummy )
Notch ( 0.11 0 Dummy )
Notch ( 0.22 0 Dummy )
Notch ( 0.33 0 Dummy )
Notch ( 0.44 0 Dummy )
Notch ( 0.55 0 Dummy )
Notch ( 0.66 0 Dummy )
Notch ( 0.77 0 Dummy )
Notch ( 0.88 0 Dummy )
Notch ( 1 0 Dummy )
)
)
DirControl ( -1 0 1 1 )
BellToggle( 0 1 0 )
AWS ( 0 1 0 )
Sanding ( 0 1 0 )
Horn ( 0 1 0 )
Wipers ( 0 1 0 )
EmergencyStopResetToggle( 0 1 0 )
EmergencyStopToggle( 0 1 0 )
Vigilance ( 0 1 0 )
Headlights ( 0 0.25 1 0 )
BailOffButton( 0 1 0 )
)

Sound ( "..\\..\\GP38\\SOUND\\gp38cab.sms" )
Name ("RENFE 1601 UN")
Description (
"Locomotora FPD3 DL500A construida por ALCo en 1955.\n\n"+
"Esta version esta en colores RENFE amarillo-gris (tracción).\n\n"+
"Locomotora tipo: Diesel-Eléctrica\n\n"+
"Fuente de alimentación: 1 Motor diesel ALCo 244G (posteriormente 251B C-3)\n\n"+
"Potencia: 1.645 CV\n\n"+
"Velocidad Máxima: 105km/h \n\n"+
"Configuracion de ejes: seis en dos bogies en configuracion C-C con seis motores de tracción General Electric 5GE761\n\n"+
"Altura: 3.997 metros\n\n"+
"Peso: 109 toneladas\n\n"+
"Longitud entre topes: 17.938 metros\n\n"+
"Anchura: 2.840 metros"
)
EngineOperatingProcedures (
"To move forward\n"+
"1. Press the W key to move the Reverser to Forward.\n"+
"2. Press the ; (SEMICOLON) key to release the train brakes.\n"+
"3. Press the [ (LEFT BRACKET) key to release the locomotive brake.\n"+
"4. Press the D key to move the throttle from Idle to Notch 1.\n"+
"5. Gradually increase power (D key), one notch at a time, until your train reaches the desired speed.\n\n"+
"To slow the train\n"+
"1. Press the A key to move the throttle to a lower setting.\n"+
"2. Use the brakes to further reduce speed if desired.\n\n"+
"To apply the dynamic brakes\n"+
"1. Press the A key to move the throttle to the Idle position.\n"+
"2. Wait for 10 seconds, then press the . (PERIOD) key to advance the Dynamic Brake handle from Off to the Setup position. After allowing a few seconds for braking circuit setup, press the . (PERIOD) key again to set the desired level of dynamic braking (Levels 1 - 8).\n\n"+
"To release the dynamic brakes\n"+
"1. Press the D key to move the throttle towards Idle.\n\n"+
"To apply the train brakes\n"+
"1. Press the ' (APOSTROPHE) key to apply the train brakes.\n\n"+
"To bail off the train brakes on the locomotive\n"+
"1. Press the / (FORWARD SLASH) key.\n\n"+
"To release the train brakes\n"+
"1. Press the ; (SEMICOLON) key to release the train brakes.\n\n"+
"To apply the locomotive brake\n"+
"1. Press the ] (RIGHT BRACKET) key to apply the locomotive brake.\n\n"+
"To release the locomotive brake\n"+
"1. Press the [ (LEFT BRACKET) key to release the locomotive brake.\n\n"+
"To activate emergency braking\n"+
"1. Press the A key to reduce the throttle to Idle.\n"+
"2. Press the BACKSPACE key to activate emergency braking.\n\n"+
"To back up\n"+
"1. Bring your train to a full stop.\n"+
"2. Press the S key to move the Reverser to the Reverse position.\n"+
"3. Release the brakes.\n"+
"4. Slowly advance the throttle lever (D key).\n\n"+
"To couple to a car or locomotive\n"+
"1. Coast into the unit at a very slow speed, about 2 mph.\n"+
"TIP: To use the Coupling view, press the 6 key.\n"+
"2. Press F9 to open the Train Operations window.\n"+
"3. If the icon for the unit you coupled to is red, the handbrake is on. Double-click the car to release the handbrake.\n"+
"4. Close the Train Operations window.\n\n"+
"To uncouple from a car or locomotive\n"+
"1. Press F9 to open the Train Operations window.\n"+
"2. Double-click a unit in the part of the train you want to uncouple from the locomotive, to set the handbrake.\n"+
"3. Double-click the coupler between the units you want to uncouple and the rest of the train.\n"+
"4. Close the Train Operations window."
)
)

--------------------------------------------------------------

Saludos
alvaromad
 
Mensajes: 59
Registrado: Mié Dic 05, 2007 1:17 pm

Notapor Julio » Dom Ene 20, 2008 10:56 pm

¡Hóla, Alvaro!:
¡Mira el correo!.
¡Saludos desde La Rioja!. Julio.
Avatar de Usuario
Julio
 
Mensajes: 1843
Registrado: Dom Feb 26, 2006 7:48 pm
Ubicación: La Rioja.

Notapor alvaromad » Lun Ene 21, 2008 11:58 am

Fuwito escribió:¡Hóla, Alvaro!:
¡Mira el correo!.


Asunto solucionado :D

Como siempre, muchas gracias Julio^^

Saludos
alvaromad
 
Mensajes: 59
Registrado: Mié Dic 05, 2007 1:17 pm


Volver a Composiciones (Consists) MSTS

¿Quién está conectado?

Usuarios navegando por este Foro: No hay usuarios registrados visitando el Foro y 12 invitados

cron